How do I clean stains from my carpet / upholstery?

How Do I Clean Stains From My Carpet / Upholstery?

Spray the stain with Oil Eater at 3 parts water to 1 part Oil Eater. Allow it to penetrate the stain for 2, or 3 minutes. Use a white cloth or paper towel to blot – never scrub, working from the outside towards the middle. After the stain has been picked up, mist the area with water and blot it up.

TOOL BOX:

To Clean Your Concrete Floors You Will Need

  • One gallon of Oil Eater®  Cleaner Degreaser
  • A synthetic bristle brush
  • One roll of paper towel
  • A water hose
  • An outdoor push broom

HOW TO:

Clean Concrete Floors with Oil Eater® Cleaner Degreaser

Uncoated concrete is a very porous substance. Cleaning oil and dirt from such a surface is a multi step process that is best done when the spill is fresh. Older spills that have been exposed to sunlight for a period of time are subject to oxidation and may not be completely removed.
Step 1) Spray the entire area to be cleaned with water.
Step 2) Pour Oil Eater® Cleaner Degreaser onto the surface concentrating the product over the area of the spill or stain.
Step 3) Using a synthetic bristle scrub brush agitate the area of the  spill or stain starting at the outer edge and cleaning towards  the center. For larger areas, use the push broom to agitate  the solution. Use caution when walking over wet areas, the  surface may be slippery!
Step 4) Allow the solution to soak for five minutes. Do Not Allow  Solution To Dry! If an area is beginning to dry, spray it with  additional water.
Setp 5) Rinse the entire area with a strong stream of water.
It may be necessary to repeat the cleaning process to clean away soils that were saturated in the concrete. Allow a minimum of 24 hours for the concrete to dry before repeating the process.